Vintage, NEW, Used and Collectable Amps

With a Jet City Custom Eminence driver and a single input, the JCA12S is our straightforward tone box. Use it as the foundation of a 20 watt half stack with JCA20H or even in a full stack configuration. It’s also the same dimensions as our JCA2112RC so stack them up for increased speaker volume.
 

Pure, simple, and full of tube tone, JCA20H delivers from a single-channel amp with absolutely no gimmick features to dilute the all-tube signal path. Elegance of design both inside and out deliver unflinching reliability in an amp good-looking enough to make a girlfriend jealous. With full EQ control and separate Preamp and Master volumes, JCA20H can deliver spanky cleans through crunchy overdrive.

Jet City has tweaked their popular single channel head! The new JCA20HV has added a presence control, a Depth switch based upon Soldano's famous Depth control and a post master-volume effects loop. It's also been re-voiced a bit cleaner and a bit darker, but is still the perfect companion for practice, gigging or studio use.

FREE USA SHIPPING!!!

JCA2112RC is a “combo” of our JCA20H and JCA12S, with tube-driven reverb included. Easy-access speaker connectors on the rear panel allow JCA2112RC to drive external cabinets either with or without the internal Jet City Eminence Custom driver. Stacked on an additional JCA12S, the speaker volume doubles and the added height brings the controls to arm’s length in a small club.

 

Jet City JCA24C 2x12.  Jet City introduces USA  hand crafted cabinets featuring precision cut Baltic Birch Plywood.  This 2x12 features a celestion vintage 30.  Rated 16ohms at 120 watts.

Jet City JCA24C 4x12.  Jet City introduces USA  hand crafted cabinets featuring precision cut Baltic Birch Plywood.  This 4x12 features a celestion vintage 30.  Rated 16ohms at 240 watts.

"This JCA48S+ takes Soldano’s signature 4×12 a step beyond with an integrated Jet Direct – speaker-emulated output box, designed by Doug Roberts of Roberts Retrovalve. Mic the custom-voiced Eminence drivers traditionally or take the Jet Direct’s simulated “mic’d speaker” output directly to the board via XLR. The 48S+ has a 1/4″ Thru output that allows you to power a second cabinet in parallel and switchable mono / stereo operation."

Complete total isolation for the perfect amp sound in a low key environment.  Don’t be afraid to turn your amp and drive the tubes for its true grit with the fear of overwhelming volume.  Loaded  with a Custom Eminence Jet City 12″ driver.  Plug your tube amp into the speaker input, and set up your amp tone – go ahead and turn it up! Clip in your favorite guitar-recording mic and position it how you prefer. Then close up the JetStream’s front door, greatly reducing the sound level in the room. Connect the ISO12′s XLR output to a recording workstation and capture screaming amp tones without waking the neighbors, or send it to the front-of-house PA system for a cranked amp quality at a controlled listening level.

A New Classic!  Designed by Andy Marshall and licensed by THD Electronics, the PicoValve is Jet City's compact, low-wattage tone machine. With dual 12AX7s shaping the preamp voicing, and a single 6L6 in the power section, this caged monster is the real deal.  From touch-sensitive and punchy cleans, to beefy, heavey Rock tones, the Pico Valve will get you the tone you want without tearing the paint off the walls. What’s more, you can custom-tailor your Pico by swapping the power tube with nearly any octal-based tube, and there’s no re-biasing necessary. Looking to complete the package? The Pico mates perfectly with the JCA12XS for a handsome and compact micro-stack. Super affordable but worth twice the price. The best deal out there.

We have the PicoValve In Stock and ready to ship!!!